Start with a clean, dry surface
Whether you're adding a single Buffalo Bisons decal or the full Three Decal Set, the most important step is preparing the surface. Both the Buffalo Bisons 4 x 4 Decal - Camo Green and the Three Decal Set apply from the back for easy placement, but they stick best to a clean, dry area. Wash the spot on your car, truck, laptop, or water bottle with mild soap and water, then let it dry completely. Any wax, dirt, or moisture can prevent the adhesive from bonding evenly.
What the catalog confirms about these decals
- Buffalo Bisons 4 x 4 Decal - Camo Green: The Buffalo Bisons 4 x 4 Decal - Camo Green is approximately 4" x 4", applies from the back, and is officially licensed and made in the USA. The back-application method means you can position the decal precisely before pressing it down, which reduces air bubbles and misalignment.

Buffalo Bisons 4 x 4 Decal - Camo Green - Buffalo Bisons Three Decal Set: The Buffalo Bisons Three Decal Set includes three individual die-cut decals that apply easily from the back and are great for decorating laptops, water bottles, windows, and more. The die-cut design means each decal has its own shape, so you can mix and match placements across multiple surfaces without trimming.

Buffalo Bisons Three Decal Set
How to apply a Buffalo Bisons decal
Both the Camo Green decal and the Three Decal Set share the same basic application process. The catalog confirms they apply from the back, which is a common method for vinyl decals.
- Peel the backing paper: Carefully separate the decal from its paper backing. The adhesive side will be exposed. Avoid touching the sticky surface with your fingers to keep it clean.
- Position the decal on the surface: Place the decal adhesive-side down on your chosen spot. Because you apply from the back, you can slide it slightly before pressing to get the alignment right.
- Press firmly from the center outward: Use a soft cloth or a squeegee to press the decal from the center toward the edges. This pushes out air pockets and helps the decal bond evenly.
- Remove the transfer tape (if present): If your decal includes a clear transfer layer on top, peel it away slowly at a low angle. If the decal lifts with the tape, press it back down and rub again.
Removing a Buffalo Bisons decal without damaging paint
When you want to take off a Buffalo Bisons decal from your car or truck, patience is key. The catalog does not specify a removal method, but vinyl decals generally respond well to gentle heat. Use a hairdryer on a low setting to warm the decal for a short time—just enough to soften the adhesive. Then peel from one corner slowly. If residue remains, a dab of rubbing alcohol on a soft cloth can help remove it. Avoid using sharp tools that could scratch the paint.
What the catalog does not confirm
The supplied information does not include specific dwell times, temperature limits, or removal instructions for either the Camo Green decal or the Three Decal Set. It also does not confirm whether the decals are repositionable after initial application or how they hold up to repeated car washes. For best results, test a small corner first and avoid applying to surfaces that are hot from direct sunlight.



